   Mace Motion Alert System
Mace Motion Alert Alarm is a passive infrared system that detects motion in any selected area.
Compact and attractive, it mounts easily (vertically or horizontally) near any entry area and is battery operated, eliminating any need for wiring.
This Motion Alarm can be coded with a personal security code and can be set to utilize a two-tone entry chime, instead of the alarm sound.
Mounting screws and AC connector (adapter not included).
No wire installation option when using 9 volt battery (not included)
Unique passive infrared system concentrates on the protected area you select.
The motion detector alarm studies the area and responds with a 105 db alarm only when a person moves into the protected area. There is a 60 second delay after arming for sensor warm up and exit delay. When activated, the alarm cycles twice with 30 or 60 second rest in between. The duration of the alarm can be programmed for 30 seconds, 60 seconds, or 90 seconds. Re-entry Delay can be programmed to prevent alarm from going off for 15 seconds, 8 seconds, or zero seconds giving you time to disarm the unit. In the entry chime mode, the Mace Motion Alert Alarm chime will "ding" each time motion is detected.
Mace Motion detector alarm can provide valuable protection for your home and property.
No wiring required, battery operated, easy installation. Features - Motion sensor detects motion and activates alarm.
- Programmable security code and entry delay timing.
- Built-in high output 105db alarm.
- Alarm/door chime option.
- Panic Button triggers alarm immediately.
- Program and low battery indicator.
- Verification tone for key pad and arm/disarm.
- Optional 9V battery operated (battery not included) and AC adaptor compatible (not included).
- 110 degree operating range out to 40 feet.
Simple Installation - Wall mountable with included screws and screw anchors.
- Recommended height is between 3 to 6.5 feet (1 to 2 meters) above floor for best coverage of protection area.
- Detection head can be flipped up for use as a shelf mounted alarm.
- No need to permanently mount in place. Allows you to move unit from one location to another.
Intrusion Memory Indicator Motion detector alarm "remembers" if someone has set off the alarm.
When you disarm the unit, if the LED flashes 3 times, it indicates that there has been an intrusion during the last arming mode.
Be sure to check your home/office thoroughly after entering.
| 
